Tire Fitment:
4" Lift Kit - Recommended max tire with no trimming: 20x9 0 offset - 35x12.50 tire. *Max with trimming: 20x10 -18 offset - 35x12.50 or 325/60R20 *Trimming requirements 4" Lift Kit - Recommended max tire with no trimming: 20x9 0 offset - 35x12.50 tire.
*Max with trimming: 20x10 -18 offset - 35x12.50 or 325/60R20
*Trimming requirements for larger than recommended wheel/tire include front valance, front felt liner edge, rear felt liner edge and front rear well edge mud flap.
Note: If using an 18-inch only -12mm offset works. A 18x9 with 0mm offset or higher does not work.
Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.
Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.
Kit Includes:
•Heavy-duty front-rear cross members and skid plate
•Heavy-duty top mount strut extensions and rear shock extensions
•Sway bar drop brackets
•Heavy-duty fab steel rear lift blocks with bump stop landings.
•Heavy-duty cast iron lift knuckles engineered to retain factory-quality geometry.
•All necessary hardware and instructions.
•Falcon Rear Shocks
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
