•New o-rings and seals
•Control valves and Nozzles are flow tested 100%
•Each Injector individually tested on state-of-the-art test equipment
•Proudly Remanufactured in the USA
•Trim code is etched on the solenoid
TIPS FOR SUCCESSFUL INJECTOR INSTALLATION:
•Follow manufacturer installation procedure and torque specifications.
•Thoroughly clean and inspect injector bores (in cylinder head).
•Verify copper combustion seals are installed on new injectors and the old combustion seals were removed with previous injectors.
•Replace fuel filter.
•Replace any fuel lines to avoid contaminating the remanufactured injectors.
Injector Trim Codes
•Trim Code - A unique 13 digit alphanumeric code assigned to each injector based on injector flow data at production. The trim codes allow the ECM to correctly balance •injector performance by adjusting the signal to each injector.
•Location (physical) - Injector Trim Codes can be found on the injector solenoid above the connector.
•Location (ECM) - Injector Trim Codes can be found using OE or similar scan tool.
Warranty:
•1 Year
•Unlimited Mileage
