Alliant Power Remanufactured Fuel Injection Control Module (FICM) for Ford (2005-07) 6.0L Power Stroke Superduty/Excursion & (2004-10) E-Series

Alliant Power Remanufactured Fuel Injection Control Module (FICM) for Ford 6.0L Power Stroke Superduty/Excursion & E-Series Pre Programmed Fuel Injection Control Module FICM fits Ford 6.0L Superduty with engine build date 2005-2007, Excursion with engine build date on or after 2-1-2005, & E-Series Vans with engine build date 2004-2010. Replaces OEM Part # 4C3Z12B599ABRM. Comes with a 12 month / 15,000 mile Limited Warranty. Pre-Programmed and Ready to Install! OEM replacement FICMs are expensive, and they come un-programmed and must be programmed by the installer prior to vehicle operation, which is a difficult and costly task for most independent repair facilities or the do-it-yourself customer. These Alliant remanufactured FICM's are 100% torn down, upgraded and fully tested on a vehicle simulator. Once each unit passes initial testing, they are pre-programmed with the appropriate vehicle software and are ready for installation and operation. All you have to do is install it and drive it away. Finding Your 6.0L Engine Build Date: The most accurate way to get the correct FICM is by looking at the Engine Data Sticker that is located on the passenger side valve cover. It will either have a date on it like this: "June 12th, 2005", or a date code in the DDMMYYYY format like this: "12062005". An OASIS report or a service work order from a Ford dealership will also show your engine build date. However you go about it, it is important that you get the "Engine Build Date", as opposed to the "Vehicle Build Date".